Color profile: Disabled Composite Default screen H:...folded xc800series.
Color profile: Disabled Composite Default screen Contents Introduction. . . . . . . . . . . . . . . . . . . . . Features . . . . . . . . . . . . . . . . . . . . Included with the XC800 Series Phone . Controls and Functions. . . . . . . . . . . . . Installation . . . . . . . . . . . . . . . . . . . . . . Selecting a Location. . . . . . . . . . . . Applying Power to the Base . . . . . Desk or Tabletop Installation . . . . . Wall Installation . . . . . . . . . . . . . . Direct Wall Mounting . . . . . . . . .
Color profile: Disabled Composite Default screen Included with the XC800 Series Phone If any of these items are missing or damaged, contact Uniden Parts Department at: (800) 554-3988, 8:00 am to 5:00 p.m. Central, Monday through Friday. Handset Base Rechargeable Battery AC Adapter Short Telephone Cord Long Telephone Cord • Precautions and Important Safety Instructions • This Owner’s Manual 3 H:...folded xc800series.
Color profile: Disabled Composite Default screen Controls and Functions 1. Talk Button T 2. Numeric Keypad 3. Tone Key 4. Memory Key M 5. Ringer and Earpiece Volume Ringer Key G V and 6. Talk/Batt Low Indicator r Channel Select Key C Pause P 7. Flash/Redial Key 8. 9. 10. Tone Pulse switch 11. Telephone Jack In 12. AC Adapter Jack In 13. Status (in use) Indicator 14. Page/Find Key 11 10 12 status 13 page/find 14 Extend•A•Phone 4 H:...folded xc800series.
Color profile: Disabled Composite Default screen Installation Selecting a Location Wall Installation Before choosing a location for your new phone, read the “Installation Considerations” included in the “Precautions and Important Safety Instructions” brochure. Standard Wall Plate Mounting These phones are designed to be mounted on a standard AT&T or GTE wall plate. 1. Plug the AC adapter into the base.
Color profile: Disabled Composite Default screen 5. Place the cord inside the molded channel on the bottom of the base. • Select a location away from electrical cables, • • pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. Make sure the wall material is capable of supporting the weight of the base and handset. Use #10 screws with anchoring devices suitable for the wall material where the base will be placed. 1.
Color profile: Disabled Composite Default screen Setting Up Your Phone Extending the Antenna Cleaning the Battery Contacts Before using your phone, be sure to raise its antenna to the vertical position. Then, fully extend the antenna. To maintain a good charge, it is important to clean all charging contacts on the handset and base about once a month. Use a pencil eraser or other contact cleaner. Do not use any liquids or solvents. Installing the Handset Battery Pack 1.
Color profile: Disabled Composite Default screen Note: Most phone systems are tone dialing. Check with your local phone company if you are not sure whether your system is tone or pulse dialing. To Avoid this Memory Effect At least once a month, operate the unit until the “Battery Low” indicator appears. Then recharge the battery for a full 15 - 20 hours. Avoid putting the handset back in the base after using the phone for a short time. This could cause “topping off” the charge.
Color profile: Disabled Composite Default screen Using Your Phone Making and Receiving Calls Changing Channels, Flash, and Page/Find The following features of the XC800 Series phones are different depending on the handset’s location when you make or receive a call. Handset On Base Handset Off Base Pick up handset (AutoTalk). Press T. Make Call 1) Pick up handset. 2) Press T. 3) Listen for dial tone. 4) Dial the number. 1) Press T. 2) Listen for dial tone. 3) Dial the number.
Color profile: Disabled Composite Default screen Programming Your Phone 5. Enter the number to be dialed in tone mode. All programming functions must be completed when your phone is in the standby mode because programming keys do not function while you are on the phone. 3300 6. If a pause is needed during dialing to access a long distance service, press P. Storing a Number in Memory P3300 Note: The P button counts as one digit.
Color profile: Disabled Composite Default screen Troubleshooting If your XC800 Series Cordless Telephone is not performing to your expectations, please try these simple steps. If you are still unable to resolve the problems, contact Uniden Customer Service at (800) 297-1023, 8:00 a.m. to 5:00 p.m. Central, Monday through Friday. Problem Suggestion Status light won’t come on when handset is placed in base. Audio sounds weak and/or scratchy. Can’t make or receive calls.
Color profile: Disabled Composite Default screen Covered under one or more of the following U.S. patents: 4,511,761 4,523,058 4,595,795 4,797,916 5,426,690 5,650,790 5,660,269 5,661,780 and other patents pending ® ©1998 Uniden America Corporation. H:...folded xc800series.vp Thu Jul 09 15:07:55 1998 All rights reserved. UDZZ01518ZB Printed in China.