Mounted Mistblowers Use and Maintenance Manual

24 unigreen
8.7 DEMOLITION AND DISPOSAL
When the sprayer will be put out of service you should wash it with
great care to remove any residues of chemical product, follow the
instructions in point 4.13 of the present handbook.
ATTENTION: It is necessary to adopt appropriate Individual Protection
Devices in manipulating waste.
The disposal of waste deriving from the demolition of the machine
must be carried out respecting the environment, avoiding soil, air and
water pollution.
Local legislation in force in the matter must be respected in any case.
Remember that waste is understood as any substance or object that
enters into the categories shown in attachment A in part IV of Legisla-
tive Decree 152/2006, that the holder has destroyed, has decided or is
obliged to destroy.
Waste deriving from the demolition of the machine is classifiable as
special waste.
8.7.1 MATERIALS FOR DEMOLITION
Non-dangerous special waste is that which can be recovered,
according to the February 1998 Ministerial Decree:
· Iron, aluminium, stainless steel and copper materials
· Plastic materials
· Electronic cards
· Hydraulic oil
· Electrical plant
8.7.2 INDICATIONS FOR A SUITABLE TREATMENT OF WASTE
The Correct management of special waste envisages:
- stocking in suitable places, avoiding mixing dangerous waste with
the non-dangerous.
- ensuring that authorised carriers and receivers carry out its
transport and disposal/recovery.
Transport of one's waste to authorised collection centres is allowed
exclusively if you are enrolled in the Environmental Management
Register.
8.7.3 ELECTRICAL AND ELECTRONIC APPARATUS WASTE
(EEAW)
The Italian government has adopted the European Parliament
directives in the matter of the disposal of electrical and electronic
waste (EEAW) (2002/95/CE and 2003/108/CE Directives) with Legi-
slative Decree n° 151,July 25 2005).
The measures: in particular, the decree established measures and
procedures aimed at:
a) forestalling the production of EEAW;
b) promoting the re-use, recycling and other forms of EEAW recovery,
in order to reduce the quantity to send for disposal;
c) improving, in terms of the environment, the actions of the subjects
who participate in the life-cycle of these apparatuses (producers,
distributors, consumers and operators directly involved in the
treatment of EEAW);
d) reducing the use of dangerous substances in electrical and
electronic apparatus.
The decree imposes the limitation and elimination of several
substances present in EEAW: lead, mercury, cadmium, chrome,
hexavalent chrome, polybrominated biphenyl, polybrominated diphenyl
and polybrominated diphenyl ethers.
The machine has been designed and created in conformity with this
directive. Follow the indications shown below.
The symbol to the side, showing a barred garbage can on wheels,
indicates the separate collection of the electrical and electronic
apparatuses of the machine.
The user of the present machine can contact the collection centres
instituted by the Local Authorities or the UNIGREEN Company
directly, or request withdrawal by the dealer, in order to carry out
correct disposal of the waste.