User`s manual

Turning the PA968 on for the First Time

Charge the PA968 for at least 16 hours before initial use.

Powering On

1. Press the Power Button on the PA968’s front panel.

Calibrate Screen

The Calibration screen automatically appears when the PA968 powers on for

the first time, or after the system is reset.

Use the stylus to tap a sequence of target marks on the PA968’s screen.

Firmly hold the stylus on top of the target mark for a moment, and then

remove. Continue to tap the target mark as it stops along the corners of the

screen.

After the calibration is complete, press Enter to confirm the calibration set-

ting, or press ESC to cancel the setting.