User`s manual

Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
Set Date and Time
The Date/Time Properties Window automatically appears after confirming
the calibration settings. Use the stylus to select the current date/time, time
zone and automatically adjust the clock for daylight saving time.
1 Tap the left or right arrows to scroll to the correct month and year, or tap the
month and year to set the date.
2 Tap the Hr/Min/Sec/AM/PM to set the time.
3 Tap the arrow in the Time Zone box to set the time zone.
4 Check the box to Automatically adjust for daylight saving to account for
daylight saving time.
5 Tap OK to save the settings and exit the Date/Time Properties Window, or tap
X to exit without saving.
Set Date
Set Time
Set Time
Zone
Saving Time
Set Daylight