Specifications

15
Network setup
4. Port forwarding (i.e. Linksys)
¾ Check List
• Use the computer that is directly connected to
the router where DVR is connected
¾ Press “setup” on the top of the page.
¾ Under the basic setup, there is a list “DHCP
start IP 192.168.1.xxx”. And then there is
“Number of address xx”.
¾ This is indicating that any devices connecting
directly on to the router will be automatically
assigned an IP between the range.
¾ Pick an IP Address for the DVR that is outside
of this range.
¾ From the top menu, click on “Applications &
Gaming”.
¾ Goto “Port Forwarding”.
¾ Example Setting:
- Application: Unitek DVR (Any name is fine)
-Start: 8000
-End: 8000
- Protocol: TCP
- IP Address: 192.168.1.[200]
-Enabled: check
¾ “Save Settings”
¾ The DVR S/W can be upgraded remotely if
additional port 20, 21 are opened.
http://portforward.com¾
; Lists routers by model numbers with port forwarding instruction by router
along with default user/password.