Specifications

18
Network setup
7. RAMS_RT (Client Software) - Local Area Setup
¾ Install the Client into the computer.
Click for DVR List
• Click “Connect” button.
• Local Area Setting: Please use the instruction below if you are viewing it from the local area. The Local
area applies any computers directly connected through the same router as where the DVR is connected.
» LOCAL AREA NETWORK (i.e.)
• DVR Model: MPEG4(Realtime) - Unitek 4xx, 4xxx, 4xxC series.
MPEG4 - Unimo 3xx series.
• DVR Name: Select any name.
• DVR Address: 192.168.1.200 (IP that has been assigned to the DVR)
• Port: 8000 (Port # that has been forwarded from the router)
¾ After entering the information, select “Add” to save.
¾ Select “Admin” or “User” Æ default password: 111111
¾ Press “Connect”
¾ If you do not see your cameras, please double check
the settings.