Specifications

19
Network setup
8. RAMS_RT (Client Software) - Remote Area Setup
¾ Install the Client into the computer.
Click for DVR List
• Click “Connect” button.
¾ After entering the information, select “Add” to save.
¾ Select “Admin” or “User” Æ default password: 111111
¾ Press “Connect”
• Remote Area Setting: Please use the instruction below if you are viewing it from the remote area. The
Remote area applies any computers not directly connected through the same router or same network as where
the DVR is connected.
» REMOTE AREA NETWORK (i.e.)
•DVR Model: MPEG4(Realtime) - Unitek 4xx, 4xxx, 4xxC series.
MPEG4 - Unimo 3xx series.
• DVR Name: Select any name.
• DVR Address: aabb16.udrdns.net (must use last 3 pairs of the MAC address)
• Port: 8000 (Port # that has been forwarded from the router)
MAC Address
•Menu Æ System Information
¾ If you do not see your cameras, please double check
the settings.