Specifications

20
Network setup
9. Internet Explorer - Local Area Setup
• Local Area Setting: Please use the instruction below if you are viewing it from the local area. The Local
area applies any computers directly connected through the same router as where the DVR is connected.
¾ Open an Internet Explorer.
¾ Erase everything off of the address bar.
¾ Type in the IP Address assigned to the DVR.
¾ Type http://xxx.xxx.xxx.xxx
:xx (xx: Port#).
¾ After entering the address, press enter.
¾ Disable any pop up blocker you may have.
¾ Select “Admin” or “User”.
¾ Default password is 111111.
¾ Press “OK”.
“Install Activate X“
¾ When logged in for the first time, it is require to
install the “Activate X”.
¾ Once “popup” is disabled, message will appear to
install “Activate X”
¾ If you do not see your cameras, please double
check the settings.