Specifications

21
Network setup
10. Internet Explorer – Remote Area Setup
• Remote Area Setting: Please use the instruction below if you are viewing it from the remote area. The
Remote area applies any computers not directly connected through the same router or same network as where
the DVR is connected.
MAC Address
¾ Open an Internet Explorer.
•Menu Æ System Information
¾ Erase everything off of the address bar.
¾ Type in the DVR address. (Last 3 pairs of the MAC) see
example below.
¾ Type http://xxxxxx.udrdns.net:xx
(xx: Port#).
¾ After entering the address, press enter.
¾ Disable any pop up blocker you may have.
¾ Select “Admin” or “User”.
¾ Default password is 111111.
¾ Press “OK”.
“Install Activate X“
¾ When logged in for the first time, it is require to
install the “Activate X”.
¾ Once “popup” is disabled, message will appear to
install “Activate X”
¾ If you do not see your cameras, please double
check the settings.