Operating instructions

14 15
Operating instructions
Your BTE hearing aids come with a push button
that allows you to further adjust your hearing
aids.
Push button
Your hearing aids are equipped with
a push button which can be set for
switching between programs, to adjust
your volume or adjust the comfort-clarity control.
Program control
If the push button has been configured as a
program control, each time you push the button,
you will move to a new hearing aid program.
Your hearing aids beep to indicate which
program you are in.
Program 1
(e.g. automatic program)
1 beep
Program 2 (e.g. speech in noise)
2 beeps
Program 3 (e.g. telephone)
3 beeps
Program 4 (e.g. music)
4 beeps
DuoLink (if enabled) (see pg 20) Opposite ear beeps
the same as side
being adjusted
Volume control
If the push button has been configured as a
volume control:
• Push the button on your right hearing aid to
increase the volume in both hearing aids.
• Push the button on your left hearing aid to
decrease the volume in both hearing aids.
Volume setting Beeps
Recommended volume level
1 beep
Turning volume up
short beep
Turning volume down
short beep
Maximum volume level
2 beeps
Minimum volume level
2 beeps