Operating instructions

34 35
If your physician prescribes eardrops, clean
any moisture that may get into the earmolds or
tubing to prevent plugging.
If the earmolds require further cleaning:
1. Disconnect the plastic tube from the hook of
the hearing aid, by holding the hearing aid in
one hand and gently pulling the tubing away
from the earhook.
2. Wash only the earmolds and tubing in warm
water with a mild soap.
3. Rinse them with cool water and dry
overnight.
4. Make sure the earmold tubes are completely
dry. Reconnect them to the earhook on your
hearing aid by sliding the tubing back on
to the earhook. Use of a hearing aid blower
can assist with removing moisture/debris
from the tube. See your hearing healthcare
professional for more information.
Cleaning your slim tubes and domes
You should have the slim tubes
and domes replaced by your
hearing healthcare professional
approximately every three to six
months or when they become
sti, brittle, or discolored.
Clean the outside of the domes at the end of
each day with a damp cloth.
You should also clean the slim tubes
periodically, with the cleaning pin provided,
when you begin to notice debris in and around
the tubes.
1. Hold the slim tube in one hand and the
hearing aid in the other hand.
2. Gently turn the hearing aid until it detaches
from the slim tube.
3. Use a damp cloth to clean the outside of the
slim tube and dome.
4. Remove the dome from the slim tube by
pulling gently, before cleaning the slim tube.