Owner manual
Table Of Contents
- Welcome To Your THZ-100 Thermostat
- Installing Your THZ-100 Thermostat
- Wiring Your THZ-100 Thermostat
- Definitions
- Single Stage Furnace and Single Stage A/C
- Dual Stage Furnace and Dual Stage A/C
- Single Stage Heat Pump with Reversing Valve O
- Single Stage Heat Pump with Reversing Valve B
- Dual Stage Heat Pump with Reversing Valve O
- Dual Stage Heat Pump with Reversing Valve B
- Boiler and A/C with Separate Transformers
- First Stage Radiant Floor Heat, Second Stage Furnace with Single Stage Cooling and External Pilot Duty Relay
- Operation For Your THZ-100 Thermostat
- Thermostat Display Information
- Changing the Heating Temperature (Temperature Override)
- Changing the Cooling Temperature (Temperature Override)
- Auxiliary Heat
- Emergency Heat
- Password Protection
- Programs
- Options
- Climate Modes
- Changing the Fan Modes
- Accessing Temperature Sensor Information
- Turning Emergency Heat On or Off
- Changing the Auxiliary Heat Offset Temperature
- Changing the 2nd Stage Offset Temperature
- Resetting the Filter Reminder
- Turning the Password Protect Feature On or Off
- Changing the LCD Screen Options
- Viewing THZ-100 Thermostat Information
- Setting the Date and Time
- Discovery Mode
- Troubleshooting Thermostat On-Screen Notifications
- Resetting the THZ-100 hermostat
Page 26
THZ-100 THERMOSTAT
Turning the Thermostat Off
If you desire to turn the HVAC system equipment off then use the
arrow keys to move the highlight bar to Climate Control Off.
Press the key below the OK key label in the smart-key label at the
bottom right of the display to select this new mode. If you decide
to cancel the operation then press the key below the Cancel key
label in the smart-key label at the bottom left of the display.
If the Climate Modes screen times out and goes back to the main
screen without pressing the OK button, no change is made to the
climate mode.
In the Climate Control Off mode, the thermostat does not activate
the system equipment to cool or heat your home.
Changing the Fan Modes
If you desire to change the system fan mode between on
continuously, periodic cycling, or automatically on when heating or
cooling is on, use the arrow keys to move the highlight bar to Fan
Modes. The current state of the fan displays in the right column.
Press the key below the OK key label in the smart-key label at the
bottom right of the display to select this new mode. If you decide
to cancel the operation then press the key below the Go Back key
label in the smart-key label at the bottom left of the display.
Selecting Fan On Continuously
If you desire the system fan to operate continuously then use the
arrow keys to move the highlight bar to On.
Press the key below the OK key label in the smart-key label at the
bottom right of the display to select this new mode. If you decide
to cancel the operation then press the key below the Cancel key
label in the smart-key label at the bottom left of the display.