Owner manual
Table Of Contents
- Welcome To Your THZ-100 Thermostat
- Installing Your THZ-100 Thermostat
- Wiring Your THZ-100 Thermostat
- Definitions
- Single Stage Furnace and Single Stage A/C
- Dual Stage Furnace and Dual Stage A/C
- Single Stage Heat Pump with Reversing Valve O
- Single Stage Heat Pump with Reversing Valve B
- Dual Stage Heat Pump with Reversing Valve O
- Dual Stage Heat Pump with Reversing Valve B
- Boiler and A/C with Separate Transformers
- First Stage Radiant Floor Heat, Second Stage Furnace with Single Stage Cooling and External Pilot Duty Relay
- Operation For Your THZ-100 Thermostat
- Thermostat Display Information
- Changing the Heating Temperature (Temperature Override)
- Changing the Cooling Temperature (Temperature Override)
- Auxiliary Heat
- Emergency Heat
- Password Protection
- Programs
- Options
- Climate Modes
- Changing the Fan Modes
- Accessing Temperature Sensor Information
- Turning Emergency Heat On or Off
- Changing the Auxiliary Heat Offset Temperature
- Changing the 2nd Stage Offset Temperature
- Resetting the Filter Reminder
- Turning the Password Protect Feature On or Off
- Changing the LCD Screen Options
- Viewing THZ-100 Thermostat Information
- Setting the Date and Time
- Discovery Mode
- Troubleshooting Thermostat On-Screen Notifications
- Resetting the THZ-100 hermostat
Page 29
THZ-100 THERMOSTAT
Turning Emergency Heat On or Off
Emergency is staged electric or gas heating included with most heat
pump systems. Emergency Heat is activated by a malfunction in the
heat pump system or when the user manually selects the option. If
you do not have a heat pump system then the Emergency Heat
feature is not displayed in the options menu list.
If you desire to turn the emergency heat either on or off then use the
arrow keys to move the highlight bar to Emergency Heat. The
current state of the emergency heat is displayed in the right column.
If emergency heat was off then the screen displays “Are you sure
you want to turn on emergency heating?” If the emergency heat
was on then the screen displays “Are you sure you want to turn off
emergency heating?”
Press the key below the Turn On or Turn Off key label in the smart-
key label at the bottom right of the display to change the state of the
emergency heat. If you decide to cancel the operation then press
the key below the Cancel key label in the smart-key label at the
bottom left of the display.