Manual

General instructions:
Gas specifications
Univex recommends that the appliance’s individual shutoff valve (supplied by
others) be left readily accessible. Univex also recommends that inspection and
maintenance of the burner and gas piping connections of this appliance be performed
at regularly scheduled intervals and only by professional gas appliance service
agencies.
Gas Code Limitations
The installation of this appliance must conform with local codes, or in the absence of local codes,
with the National Fuel Gas Code, ANSI Z223.1, The Natural Gas installation Code CAN/CGA-
B149.1 or the Propane Installation Code, CAN/CGA-B149.2, as applicable including: The
appliance and its individual shutoff valve (supplied by others) must be disconnected from the gas
supply piping system during any pressure testing of that system at test pressures in excess of 1/2 psi
(3.45 kPa). The appliance must be isolated from the gas supply piping system by closing its
individual manual shutoff valve (supplied by others) during any pressure testing of the gas supply
piping system at test pressure, equal to or less than 1/2 psi (3.45 kPa).
The appliance must be installed under a ventilation hood only.
10