Manual

2. Remove the access cap by using a wrench, turning the access cap anticlockwise.
3. Remove spring retainer from the cap by pushing against the flat side of the
spring retainer. Look at the spring retainer to locate the “NAT” or “LP”
position.
4. To convert from Natural gas to LP gas, turn over the spring retainer so the
“LP” is showing on the bottom.
To convert from LP gas to Natural gas, turn over the spring retainer so the
“NAT” is showing on the bottom.
5. Snap the spring retainer back into the cap.
6. Reinstall the cap onto the regulator.
6