Instruction manual

7510/7512
BASE AND KNIFE HOUSING ASSEMBLY
MODEL 7510 - 7512
FIGURE 3
ILLUS. NO. PART NO. DESCRIPTION QTY.
1. 7510012 WASHER, KNIFE 1
2. 7510015 KNOB, KNIFE GUARD 1
3. 7510013 NUT KNIFE 1
4. 7510150 LOCK PIN, SHARPENER 1
5. 7510001 BACK KNIFE GUARD (MODEL 7510) 1
7512001 BACK KNIFE GUARD (MODEL 7512) 1
6. 7510156 WASHER, KNIFE SHIM AS REQ;
7. 7510002 SHAFT, KNIFE 1
8. 7510158 WASHER, KNIFE SHIM AS REQ.
9. 7510004 SPACER 1
10. 7510154 PULLEY, KNIFE 1
11. 6509012 BUSHING, KNIFE 1
12. 6509014 SCREW, BLADE 3
13. 8512240 SCRAPER, BLADE 4
14. 7510011 KNIFE GUARD (MODEL 7510) 1
7512011 KNIFE GUARD (MODEL 7512) 1
15. 7510009 BLADE (MODEL 7510) 1
7512009 BLADE (MODEL 7512) 1
16. 7510008 INSERT, KNIFE 7510 1
7512008 INSERT, KNIFE 7512 1
17. 1012167 BALL BEARING 2
18. RESERVED
19. 7510022 KNIFE DEFLECTOR 1
20. 8512206 LOCATING PIN 1
21. 7510023 KNIFE DEFLECTOR SCREW 1
22. 7510019 SLICER BODY 1
23. 8512208 GRADUATED KNOB BUSHING 1
24. 8512210 FRONT WHEEL 1
25. 6509098 SET SCREW 1
26. 8512214 SET SCREW 2
27. 7510084 GRADUATED KNOB 1
28. 8512211 REAR WHEEL 1
29. 8512209 RIVET 2
30. 7120009 ON-OFF SWITCH 1
31. 7120009 SWITCH JAM NUT (PART OF SWITCH)
32. 7120011 SWITCH GUARD 1
33. 7120009 SWITCH JAM NUT (PART OF SWITCH)
34. 7120014 INDICATOR LIGHT 115V 1
7120041 INDICATOR LIGHT 220V 1
35. 4400081 SCREW, DOME DRIVE, NO.6 X 5/16 1
36. 7120026 BOTTOM COVER 1
7120126 BOTTOM COVER, 100 V ONLY 1
37. 7510094 RUBBER SUCTION FEET 4
38. 7510014 KNIFE GUARD SHAFT 1
39. 7510021 WASHER, FLAT 2
40. 8512525 LOCK WASHER, EXTERNAL TOOTH M10 2
41. 7510020 SCREW, HEX SOCKET HD M10-1.25 X 25MM 2
42. 7120130 SPACER 100 V ONLY 4
43. 8512326 STUD 100V ONLY 4
44. 4400338 LABEL, DURO (NOT SHOWN) 1
PAGE 13