Manual

Pagina 8
. Remove the plug from the electrical power supply during machine maintenance.
. Only qualified and well-instructed staff can carry out mechanical or electrical operations.
. The machine must be used by one person at a time.
. Do not remove the guards when the machine is on.
4.1 DANGER DUE TO MECHANICAL COMPONENTS
. The safety guards protect all the parts. Keep them on during normal operations. All the guards
are controlled by a micro. An error will display when they are not closed, therefore the machine
will not work.
. There is a risk of injuring yourself during machine maintenance, particularly when parts are
removed without complying with safety standards.
. There is no danger if the machine is used correctly, as described in chapter 8.
4.3 DANGER DUE TO HYDRAULIC COMPONENTS
. Such danger is not contemplated because the components withstand at least five times 40 bar
pressure.
4.4 DANGER DUE TO LACK OF HYGIENE
. If the precautions in the MAINTENANCE chapter are not strictly complied with, there may be
serious hygiene-related danger.
4.5 DANGER DUE TO NOISE
. The average noise level measured near the work station is under 70 decibels.
4.2 DANGER DUE TO ELECTRICAL COMPONENTS
. Such danger is not covered because the components are not directly accessible. Broken or
damaged cables or electrical components must be promptly replaced by specialist staff or an
electrician.
4 - SAFETY