Manual

Operation manual
Pag. 6/15
MACISTE LIFTER
2. Machine description
MACHINE DESCRIPTION AND USE:
The machine called MACISTE LIFTER is an electromechanically controlled equipment suited to lifting BOWL
TROLLEYS for bread-making machines that contain up to 250 kg of dough with an overall weight of 400 kg. Any
other use that is not expressly authorized and provided for violates the design and voids the safety requirements.
The lifter is built pairing a steel welded structure to a large-sized hydraulic cylinder that guides a pair of chain holding
pulleys that are also large-sized.
The hydraulic control unit pushes the bowl holder trolley to the established position where the driven forks make the
trolley rotate around its pin placed at a pre-set fixed height.
Once electrical consent is received by the equipment, the unloading valve opens, causing the lifter to return to its
original position.
The machinery, which has large dimensions in all of its parts, to ensure long life, was designed to withstand workloads
in artisan and industrial settings.
As specified above, the machines must be used by trained and authorized personnel.
Any other use is forbidden, any particular needs and specifications must be examined by the SELLER on request.
1) LIFTING ARCH ASSEMBLY: it is used to block
the bowl during the up/down and tipping phase;
2) MOBILE GUARD: it is used to prevent anyone
from approaching the bowls during the ascend and
descend phase;
3) CHUTE: it is used to facilitate the removal of the
dough;
4) LIFTING GUIDES: are used to slide the lifting
forks during the up/down phase;
5) HYDRAULIC CYLINDER: hydraulic device used
to lift or lower the bowl lifting forks;
6) CONTROL PANEL: this electro-mechanical
device is used to lift and/or lower the lifting arms;
7) HYDRAULIC CONTROL UNIT: hydraulic device
used to lift/lower the lifting arch;
8) BEARING STRUCTURE: machine body;