Manual

CHOOSING THE RIGHT LOCATION FOR YOUR NEW MIXER
When selecting the best location for the mixer, it is helpful to consider the following:
• Where is the best location for the operator, both for saving steps and easy viewing?
• Is this a good location for product flow as in:
• Easy to get ingredients to the mixer?
• Destination of the mix after mixing?
• Is there existing electrical service at this location?
• Does this location provide easy access for cleaning and service?
• Check to be sure that your mixer with attachments does not extend out into heavy
traffic
areas.
• If stands and / or portable equipment are to be used along side of your mixer, can
they be moved easily to and from your mixer?
IMPORTANT ELECTRICAL SERVICE INFORMATION
Electrical wiring instructions are found in the wiring diagram (Figures 2A thru 2C) on pages
13 through 15. Before making electrical connections, CHECK the specifications on the
nameplate to make sure that they agree with the available electrical service.
USER FRIENDLY SAFETY GUARD
Your SILVER 50 spiral mixer features a two part safety guard. The Swing Safety Guard is
the front one and it is easily opened by lifting it up. It will be helpful to do this to place
ingredients in the bowl. You can also use the stainless steel grate in the lid to add
ingredients and it provides a clear view of the product throughout the mixing cycle.
This mixer will not operate unless the Safety Guard is properly engaged.
The guards activate safety switches that enable the mixer to operate only when the guards
are closed. The mixer will automatically stop if the guard is opened.
The bowl shield is positioned on top of the spiral above the bowl and it prevents any
contamination of your final dough such as grease , oil , dust , etc.
PAGE 5