User's Manual

■ chapter 4 upgrading your computer
4-5
11. Re-attach the metal cover to the new hard drive and
tighten 4 Screw C’s. Note the green PC board of the hard
disk drive is facing against the metal case.
12. Re-attach the HDD module to the HDD connector.
13. Put the HDD cover back and re-attach Screw A.
Congratulations! You have now completed the hard drive
upgrade. When you boot up the PC, you may need to create a
primary HDD partition and reformat the new drive and re-install
O/S, drivers, and all the necessary applications.