Instructions

Stand 4.11.2021

23 von 96

Display

Indicates the current temperature and mode. After 5 minutes with no

input, the display will switch to stand-by mode and can be re-activated

by pressing any button.

Display of the currently selected mode

“Mode” button

For setting the temperature and the corresponding mode.

“ON/OFF” button

For switching the appliance on/off.

BEFORE FIRST USE

1. Remove all packaging and transport safety devices. Keep the packaging

material away from children. Choke hazard! Dispose of the packaging

material according to the applicable statutory waste disposal regulations.

2. Inspect the appliance for damage. If there is visible damage, do not operate

the appliance; instead, contact our customer service department.

3. Wipe off all parts with a moist cloth.

4. Check to make sure the base is stable.

5. Remove the kettle from the base.

6. Press the opening button on top of the appliance.

7. Add 1.5 l of clear and cold water (up to the “Max” mark).

8. Close the lid by pressing lightly until it clicks into place.

9. Connect the base via the power cord to the power supply (220–240 V~,

50/60 Hz).

10. Place the kettle on the base.

11. Press the “ON/OFF” button to switch the appliance on.

12. When the water boils, the boil stop shuts off the appliance automatically.

13. For hygienic reasons, discard the water from the first boiling.