SDS
Case material composes 5-6% of the article. Case material includes the following components: 1-Propene,
homopolymer (9003-07-0); Polystyrene (9003-53-6); Acrylonitrile, polymer with styrene (9003-54-7); Acrylonitrile,
polymer with 1,3-butadiene and styrene (9003-56-9); Styrene polymer with 1,3-butadiene and styrene (9003-56-9);
Styrene polymer with 1,3-butadine (Kraton) (9003-55-8); Ethylene, chloro-, polymer (9003-86-2); Hard Rubber;
Polycarbonate; Polyethylene.
SECTION 4: FIRST AID MEASURES
Description of first aid measures.
Eye contact:
First aid is not expected to be necessary if material is used under ordinary conditions and as recommended.
If contact with material occurs flush eyes with water. Get medical attention.
Inhalation:
First aid is not expected to be necessary if material is used under ordinary conditions and as recommended.
If signs/symptoms develop, move person to fresh air. Administer oxygen if breathing is d
icult. Get
medical attention.
Skin contact:
First aid is not expected to be necessary if material is used under ordinary conditions and as reco
mme
nded.
If exposure to electrolyte (sulfuric acid) occurs, flush with large quantities of water for 15 minutes.
Immediately remove contaminated clothing and shoes. If exposure to lead component occurs, wash
contaminated skin with plenty of soap and water.
4.1
4.1.1
4.1.2
4.1.3
3.1 Description of the mixture:
4.1.4 Ingestion:
First aid is not expected to be necessary if material is used under ordinary conditions and as recommended.
If electrolyte (sulfuric acid) portion of battery is ingested give large quantities of water DO NOT induce vomiting,
Get medical attention immediately. If lead portion of battery is ingested get medical attention immediately.
SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS
EC No
Page 3 of 21
SAFETY DATA SHEET