Quick Start Guide

Follow direction as figure, gentaly insert SIM card into slot.
Same procedure to TF card and PSAM.
Causion:
1. Please use Nano card;
2. Please not overexert when inserting SIM, TF, and PSAM card.
i2000
Smart Minipos Terminal
3.01.200.10168
Overview
Power on: Long press the power key until the device screen lights up.
To turn off device: Press power button during operation until the device
popup a menu, select “Power off”.
Off Screen: When screen on, press power key, screen will be turned off.
Resume: Press the power key while system is in sleep mode.
Contactless card indicator: Show contactless card reading status.
Notice: If not use device for long time, please power of the device.
Magnetic card reader located at the right side of the device.
Please keep hands steady when holding the terminal and swiping card.
When swiping card, please make the magnetic strip of the card contact
to magnetic block and quickly pass through the slot.
Do not change swipe direction or move card up before finish reading,
Either way to swipe card is acceptable.
How to use magnetic card reader
IC card reader located at bottom of the terminal. Please let metal IC side
up when insert IC card into slot. Keep inserting the IC card until feel the
card inserted to the end. Do not use strong force to plug the card.
Caution: Do not pull out the card when the
transaction is not
completed yet.
How to use IC card reader
The reading area of the contactless card is located at the cover of the
reading area.Recommended reading rage is 0-3cm Ｐlease let the card
inprinter. When reading card, just let the contactless card close to the
parallel with reading area for better reading performance.
How to read contactless card
Package includes
Device x 1 Battery x 1 Power adapter x 1 USB cable x 1
Quick Start Guide x 1
SIM Card and TF Card installation instructions
System LED
Contactless
card active area
Rear Camera
Main Screen
Menu Key
Home Key
Back key
Flashlight
Speaker
Scan windiw
Magnetic card reader
IC card reader
Type C Charging port
Power key
Volume Up+
Volume Down-
Scan Button/Custom key
TF
slot
SIM1
slot
SAM1
SAM1
slot
SIM/SAM2
slot
TF