Product data

USRobotics
Command Reference
S-Parameters - 99
6 NO DIALTONE For X2 and X4, the modem has been instructed to wait for dial tone during dialing but
none is received.
7 BUSY For X3 and X4, if busy tone detection is enforced, the busy (engaged) signal is
detected on the line when the modem is attempting to originate a call.
8 NO ANSWER The modem is attempting to originate a call if a continuous ringback signal is
detected on the line until the expiration of the timer S7.
9 CONNECT 600 The modem has connected to the line, the DTE speed is 600 bps, and DTE speed
reporting is enabled.
10 CONNECT 2400 The modem has connected to the line and either the line speed is 2400 bps and DCE
speed reporting is enabled, or the DTE speed is 2400 bps and DTE speed reporting
is enabled.
11 CONNECT 4800 The modem has connected to the line and either the line speed is 4800 bps and DCE
speed reporting is enabled, or the DTE speed is 4800 bps and DTE speed reporting
is enabled.
12 CONNECT 9600 The modem has connected to the line and either the line speed is 9600 bps and DCE
speed reporting is enabled, or the DTE speed is 9600 bps and DTE speed reporting
is enabled.
13 CONNECT 7200 The modem has connected to the line at 7200 bps and DCE speed reporting is ena-
bled.
14 CONNECT
12000
The modem has connected to the line at 12000 bps and DCE speed reporting is ena-
bled.
15 CONNECT
14400
The modem has connected to the line at 14400 bps and DCE speed reporting is ena-
bled.
16 CONNECT
19200
The modem has connected to the line and either the line speed is 19200 bps and
DCE speed reporting is enabled, or the DTE speed is 19200 bps and DTE speed
reporting is enabled.
17 CONNECT
38400
The modem has connected to the line, the DTE speed is 38400 bps, and DTE speed
reporting is enabled.
18 CONNECT
57600
The modem has connected to the line, the DTE speed is 57600 bps, and DTE speed
reporting is enabled.
19 CONNECT
115200
The modem has connected to the line, the DTE speed is 115200 bps, and DTE
speed reporting is enabled.
22 CONNECT
75TX/1200RX
The modem has established a V.23 originate connection and line speed reporting is
enabled.
23 CONNECT
1200TX/75RX
The modem has established a V.23 answer connection and line speed reporting is
enabled.
24 DELAYED For X4, sent when a call fails to connect and the number dialed is considered
'delayed' due to country blacklisting requirements.
32 BLACKLISTED For X4, sent when a call fails to connect and the number dialed is considered 'black-
listed'.
33 FAX A fax modem connection is established in a facsimile mode.
Table 4-2: Result Code Definitions
Code Message Meaning