Product data

USRobotics
Command Reference
S-Parameters - 101
63 CONNECT
26400
The modem has connected to the line, the DTE speed is 26400 bps and DTE speed
reporting is enabled.
64 CONNECT
28800
The modem has connected to the line and either the line speed is 28800 bps and
DCE speed reporting is enabled, or the DTE speed is 28800 bps and DTE speed
reporting is enabled.
66 +DR: ALT The modem has connected to the line in MNP Class 5 and +DR: message reporting
is enabled. (See S95, Wn, and Xn.)
67 +DR: V.42B The modem has connected to the line in V.42 bis and +DR: message reporting is
enabled. (See S95, Wn, and Xn.)
69 +DR: NONE The modem has connected to the line without data compression and +DR: message
reporting is enabled. (See S95, Wn, and Xn.)
70 +ER: NONE The modem has connected to the line without any form of error correction and the
+ER: message reporting has been enabled. (See S95, Wn, and Xn.)
77 +ER: LAPM The modem has connected to the line in V.42 LAPM error correction mode and +ER:
message reporting has been enabled. (See S95, Wn, and Xn.)
78 +MRR: 31200 The modem has connected to the line at 31200 bps and carrier reporting is enabled.
(See S95 and Xn.)
79 +MRR: 33600 The modem has connected to the line at 33600 bps and carrier reporting is enabled.
(See S95 and Xn.)
80 +ER: ALT Sent when the modem has connected in the MNP mode of error correction, and +ER:
message reporting has been enabled. (See S95, Wn, and Xn.)
83 LINE IN USE The modem attempted to go off-hook when an extension was already occupying the
line.
84 CONNECT
33600
The modem has connected to the line, the DTE speed is 33600 bps and the DTE
speed reporting is enabled.
91 CONNECT
31200
The modem has connected to the line DTE speed is 31200 bps and the modem is to
report the DTE speed upon connecting.
134 +MCR: B103 The modem has connected to the line with Bell 103 modulation and modulation
reporting is enabled. (See +MR, S95 and Xn.)
135 +MCR: B212 The modem has connected to the line with Bell 212 modulation and modulation
reporting is enabled. (See +MR, S95 and Xn.)
136 +MCR: V21 The modem has connected to the line with ITU-T V.21 modulation and modulation
reporting is enabled. (See +MR, S95 and Xn.)
137 +MCR: V22 The modem has connected to the line with ITU-T V.22 modulation and modulation
reporting is enabled. (See +MR, S95 and Xn.)
138 +MCR: V22B The modem has connected to the line with ITU-T V.22 bis modulation and modulation
reporting is enabled. (See +MR, S95 and Xn.)
139 +MCR: V23 The modem has connected to the line with ITU-T V.23 modulation and modulation
reporting is enabled. (See +MR, S95 and Xn.)
140 +MCR: V32 The modem has connected to the line with ITU-T V.32 modulation and modulation
reporting is enabled. (See +MR, S95 and Xn.)
Table 4-2: Result Code Definitions
Code Message Meaning