Product data

USRobotics
Command Reference
Fax Class 1 and Fax Class 1.0 Commands - 113
+FCLASS=1.0 - Select Facsimile Class 1.0 Mode
+FCLASS=1.0 selects the Fax Class 1.0 Mode. The Fax Class 1.0 Mode
commands and responses described in this section are applicable when
command +FCLASS=1 as shown Table 5-1. (See +FCLASS for the definition of
the FCLASS command.)
Mode Commands
+FAE - Auto Answer Enable
This command enables or disables fax adaptive answer.
Syntax
+FAE=<value>
Defined Values
<value> Decimal number corresponding to the selected option.
0 Disable data /fax auto answer mode. (Default.)
1 Enable data /fax auto answer mode. The modem determines the
calling type and issues DATA result code (13) if the caller is a
data modem or issues FAX result code (15) if the caller is a fax
modem.
+FTS - Transmit Silence
This command causes the modem to terminate a transmission and wait for <time>
10-ms intervals before responding with the OK result code.
Syntax
+FTS=<time>
Defined Values
<time> Decimal number from 0 (default) to 255 which specifies the length
of time in 10-ms intervals to delay before responding with the OK
result code after terminating the session.
Result Codes
OK Reported when transmission has been terminated for the
specified amount of time.
ERROR <value> is invalid or this command is issued while the modem is
on-hook.