Product data

USRobotics
Command Reference
Voice Commands - 145
the produced any control tone cadence report when enabled by
the <enable> subparameter. 0 The modem will produce only
CPOF and CPON messages.
Other Reserved.
Reporting Current or Selected Values
Command: +VDT?
Response: +VDT: <enable>,<report>
Example: +VDT: 0,0 For the default setting.
Reporting Supported Range of Parameter Values
Command: +VDT=?
Response: +VDT: (<enable> range),(<report> range)
Example: +VDT: (0,1),(0)
Result Codes
OK <enable>,<report> = (0,1),(0)
ERROR Otherwise, or if not in Voice Mode.
+VBT - Buffer Threshold Setting
This command causes the modem to report the <deassert> and <assert>
subparameter values as a <compound ranges of values>. The OK result code
follows the report.
Syntax
+VBT=<deassert>,<assert>
Defined Values
To be added
Reporting Current or Selected Values
Command: +VBT?
Response: +VBT: <deassert>,<assert>
Example: +VBT: TBD For the default setting.
Reporting Supported Range of Parameter Values
Command: +VBT=?