Product data

USRobotics
Command Reference
Voice Commands - 147
Response: (<rate> range)
Example: (0,1,2,3,4,8,16,24,48)
Result Codes
OK <rate> = 0,1,2,3,4,8,16,24,48.
ERROR Otherwise, or if not in Voice Mode.
+VSP - Speakerphone ON/OFF
This command turns the speakerphone ON or OFF
Syntax
+VSP=<mode>
Defined Values
<mode> Decimal number corresponding to the selected option. 0 The
speakerphone function is OFF. 1 The speakerphone function is
ON.
Reporting Current or Selected Values
Command: +VSP?
Response: +VSP: <mode>
Example: +VSP: 0 For the default setting.
Reporting Supported Range of Parameter Values
Command: +VSP=?
Response: +VSP: (<mode> range)
Example: +VSP: (0,1)
Result Codes
OK <mode> = 0 or1.
ERROR Otherwise, or if not in Voice Mode.
+VDX - Speakerphone Duplex Mode
This command selects speakerphone half-duplex or full duplex mode.
Syntax
+VDX=<mode>