Product data

USRobotics
Command Reference
Data Command Set - 24
+GOI - Request Global Object Identification
This command causes the modem to transmit one or more lines of information
text identifying the device, based on the ISO system for registering unique object
identifiers. Typically, the text consists of a single line containing numeric strings
delimited by period characters. The general format of object identifiers is defined
in Section 28 of ITU-T Recommendation X.208; the encoding rules are defined in
ITU-T Recommendation X.209. The response is provided by the .INF file.
Syntax
+GOI
Typical Response
+GOI:
OK
+GCAP - Request Complete Capabilities List
This extended-format command causes the modem to transmit one or more lines
of information text listing additional capabilities command +<name>s , which is
intended to permit the user to identify the overall capabilities of the modem. In
particular, if the modem implements a particular modem control standard that
uses Extended Syntax Commands, and if that modem control standard includes
command(s) that indicate general capabilities, the +<names>(s) of those
commands will be reported to the modem in response to a +GCAP command.
Syntax
+GCAP
Example Responses
+GCAP: +FCLASS, +MS, +ES, +DS, for a data modem that supports all
capabilities listed Where:
+FCLASS T.class1, +F (Class 1 Facsimile modem Control)
+MS +M commands (Modulation Control: +MS and +MR commands)
+ES +E commands (Error Control: +ES, +EB, +ER, +EFCS, +ETBM)
+DS +D commands (Data Compression: +DS and +DR)
+GCI - Country of Installation
This extended syntax command indicates and selects the country of installation
for the modem. This parameter selects the settings for any operational
parameters that need to be adjusted for national regulations or telephone
networks.