Product data
USRobotics
Command Reference
Data Command Set - 28
X value.
If the modem is in facsimile mode (+FCLASS=1, or 1.0), the only message sent to
indicate a connection is CONNECT without a speed indication.
Syntax
X<value>
Defined Values
<value> Decimal number corresponding to the selected option.
0 CONNECT result code is given upon entering online data state.
Dial tone and busy detection reporting are disabled.
1 CONNECT <text> result code is given upon entering online data
state. Dial tone and busy detection reporting are disabled.
2 CONNECT <text> result code is given upon entering online data
state. Dial tone detection reporting is enabled, and busy detection
reporting is disabled.
3 CONNECT <text> result code is given upon entering online data
state. Dial tone detection reporting is disabled, and busy
detection reporting is enabled.
4 CONNECT <text> result code is given upon entering online data
state. Dial tone and busy detection reporting are both enabled.
(Default.)
Result Codes
OK <value> = 0 to 4.
ERROR Otherwise.
Table 3-1: Result Codes
Short Form Long Form n Value in ATXn Command Notes
0 1 2 3 4
+F4 +FCERROR x x x x x
0 OK x x x x x
1 CONNECT x x x x x
2 RING x x x x x
3 NO CARRIER x x x x x
4 ERROR x x x x x
5 CONNECT 1200 1 x x x x
6 NO DIALTONE 3 3 x x x