Product data

USRobotics
Command Reference
Data Command Set - 40
$ Wait for credit card dialing tone before continuing with the dial
string. If the tone is not detected within the time specified by S7 or
S6, the modem will abort the rest of the sequence, return on-
hook, and generate an error message.
& Wait for credit card dialing tone before continuing with the dial
string. If the tone is not detected within the time specified by S7 or
S6, the modem will abort the rest of the sequence, return on-
hook, and generate an error message.
, Dial pause: the modem will pause for a time specified by S8
before dialing the digits following ",".
; Return to command state. Added to the end of a dial string. This
causes the modem to return to the command state after it
processes the portion of the dial string preceding the ";". This
allows the user to issue additional commands while remaining off-
hook. The additional commands may be placed in the original
command line following the ";" and/or may be entered on
subsequent command lines. The modem will enter call progress
only after an additional dial command is issued without the ";"
terminator. Use "H" to abort the dial in progress, and go back on-
hook.
^ Toggles calling tone enable/disable: applicable to current dial
attempt only.
( ) Ignored: may be used to format the dial string.
- Ignored: may be used to format the dial string.
<space>Ignored: may be used to format the dial string.
T - Set Tone Dial Default
This command forces DTMF dialing until the next P dial modifier or P command is
received. The modem will set an S-Parameter bit to indicate that all subsequent
dialing should be conducted in tone mode. Note that the DP command will
override this command. Clears S14 bit 5.
This command may not be permitted in some countries.
Syntax
T
Result Codes
OK
P - Set Pulse Dial Default
This command forces pulse dialing until the next T dial modifier or T command is