Product data

USRobotics
Command Reference
Data Command Set - 44
Result Code
OK <value> = 0 to 2.
ERROR Otherwise.
&P - Select Pulse Dial Make/Break Ratio
This command determines the make/break ratio used during pulse dialing. It is
only effective if the appropriate bit to enable this command is set through the .INF
File. If enabled, it will override the make/break ratios in the OEM parameters in the
.INF File. The default is country-dependent.
Syntax
&P[<value>]
Defined Values
<value> Decimal number corresponding to the selected information.
0 Selects 39%-61% make/break ratio at 10 pulses per second.
(Default.)
1 Selects 33%-67% make/break ratio at 10 pulses per second.
2 Selects 39%-61% make/break ratio at 20 pulses per second.
3 Selects 33%-67% make/break ratio at 20 pulses per second.
Result Codes
OK <value> = 0 to 3.
ERROR Otherwise.
&V - Display Current Configuration and Stored Profile
This command reports the current (active) configuration and the stored (user)
profiles.
Syntax
&V
Result Code
OK
Example:
AT&V