Product data

USRobotics
Command Reference
Data Command Set - 50
+MCR: Report Syntax
Response: +MCR: <carrier> <carrier>
Alphanumeric code corresponding to the reported carrier.
Defined values are:
B103 For Bell 103
B212 For Bell 212
V21 For V.21
V22 For V.22
V22B For V.22bis
V23C For V.23
V32 For V.32
V32B For V.32bis
V34 For V.34
V90 For V.90
V92 For V.92
+MRR: Report Syntax
Response: +MRR: <tx_rate>,<rx_rate> <tx_rate>
Decimal transmit rate in bits/s. <rx_rate> Decimal receive rate in
bits/s.
Example: +MRR: 28800, 48000
%E - Enable/Disable Line Quality Monitor, Auto-Retrain, and
Auto-Rate Renegotiation
This command controls whether or not the modem will automatically monitor the
line quality and request a retrain (%E1) or a rate renegotiation when line quality
merits a change. If enabled, the modem attempts to retrain for a maximum of 30
seconds.
Syntax
%E[<value>]
Defined Values
<value> A decimal number corresponding to the selected option: