Use and Care Guide

-7-
NOTICE: United States Stove Company grants no warranty, stated or implied, for the installation or maintenance
of your wood stove and assumes no responsibility of any incidental or consequential damages.
ASSEMBLY INSTRUCTIONS
1. Uncrate the stove and remove packing materials and protective poly bag. (save cardboard box for further
assembly.)
2. Remove parts from inside of stove. Parts include: one feed door, four legs, hardware pack, ue collar, hearth
plate, and bottom air channel.
3. Place attened carton on oor and carefully turn stove over onto carton.
4. Attach bottom air channel with four (4) 1/4-20 X 3/8" screw, and four (4) washers.
5. Attach hearth to bottom of stove with two (2) 1/4-20 x 1-3/16 screws, two (2) washers, and two (2) 1/4-20 jam
nuts.
REQUIRED TOOLS
• Safety Glasses
• Hearth Gloves
• Pencil
• 6' Folding Ruler or Tape Measure
• Tin Snips
• Drill
• 1/8" dia. Drill Bit
• Adjustable Wrench
• (Sheet Metal Screws)
• #2 philips screw driver
REQUIRED MATERIALS
• Note: the following items are not included with your
stove
• Flooring protector as specied
• Chimney Connector
• 1/2" Sheet Metal Screws
• Chimney
• Furnace Cement
CAUTION: Stove is heavy. Make sure you have adequate help and use proper lifting techniques whenever
moving stove.