SDS

1332-58-7 < 10Kaolin
1317-65-3 < 10Limestone
9005-25-8 < 10Starch
471-34-1 < 2Calcium carbonate
Impurities
CAS number %Chemical name
Crystalline silica (Quartz)
14808-60-7
≤ 2
Composition comments
All concentrations are in percent by weight unless ingredient is a gas.
Raw materials in this product contain respirable crystalline silica as an impurity. The weight
percent of respirable crystalline silica found in this product is ≤ 2%. Exposures to respirable
crystalline silica during the normal use of this product must be determined by workplace hygiene
testing.
Raw materials and/or coatings in this product contain small amounts of titanium dioxide, which has
been classified as possibly carcinogenic to humans by the International Agency for Research on
Cancer (IARC). However, per IARC "no significant exposure to primary particles of titanium dioxide
is thought to occur during the use of products in which titanium dioxide is bound to other materials,
such as in paints" (1). See Section 16 for further information.
European Commission (EC) Annex number for Slag Wool Fibers: 650-016-00-2
4. First-aid measures
Inhalation
Dust irritates the respiratory system, and may cause coughing and difficulties in breathing. Move
injured person into fresh air and keep person calm under observation. Get medical attention if
symptoms persist.
Skin contact
Contact with dust: Rinse area with plenty of water. Get medical attention if irritation develops or
persists.
Eye contact
Dust in the eyes: Do not rub eyes. Flush thoroughly with water. If irritation occurs, get medical
assistance.
Ingestion
Rinse mouth. Get medical attention if symptoms occur.
Most important
symptoms/effects, acute and
delayed
Under normal conditions of intended use, this material does not pose a risk to health. Dust may
irritate throat and respiratory system and cause coughing.
Indication of immediate
medical attention and special
treatment needed
Provide general supportive measures and treat symptomatically.
General information
Ensure that medical personnel are aware of the material(s) involved.
5. Fire-fighting measures
Suitable extinguishing media
Use fire-extinguishing media appropriate for surrounding materials.
Unsuitable extinguishing
media
Not applicable.
Specific hazards arising from
the chemical
Not a fire hazard.
Special protective equipment
and precautions for firefighters
Selection of respiratory protection for firefighting: follow the general fire precautions indicated in
the workplace. Self-contained breathing apparatus and full protective clothing must be worn in
case of fire.
Fire fighting
equipment/instructions
Use standard firefighting procedures and consider the hazards of other involved materials.
Specific methods
Cool material exposed to heat with water spray and remove it if no risk is involved.
General fire hazards
No unusual fire or explosion hazards noted.
6. Accidental release measures
Personal precautions,
protective equipment and
emergency procedures
See Section 8 of the SDS for Personal Protective Equipment.
USG® Radar™ Basic Acoustical Ceiling Panels SDS US
918325 Version #: 01 Revision date: - Issue date: 19-December-2014
2 / 8