Buying Guide

USG Interior Finishing Products | 12
USG Sheetrock® Brand Paper-Faced
Metal Corner Bead 3/4" Bullnose
Outside Corner, Nail-On (SLOC N)
Dimensions
Also available in USG Beadex®
Brand (Northwest only)
Style A Radius B
SLOC N 9/16" 3/4" 9/16"
SLOC N
41901
Note: OS = Offset
B
A
3/4" Radius
USG Beadex® Brand Paper-Faced
Metal Corner Bead 3/4" Bullnose
Outside Corner, Nail-On (Santa Fe™ N)
Provides economical alternate for bullnose corners. Can be fastened with nails or screws. Standard lengths: 8',
9,' 10'. Meets ASTM C1047.
Dimensions
Available in Northwest only
Style A Radius
Santa Fe N
41949
Santa Fe™ N 5/8" 3/4"
Note: N = Nail-On
B
A
3/4" Radius
USG Beadex® Brand Paper-Faced
Metal Corner Bead 3/4" Bullnose
Outside Corner, Nail-On (SLOC NXW)
Use for applications where nailing or other mechanical fastening is required. Creates 135° offset outside
corner. Standard lengths: 8', 9', 10'. Meets ASTM C1047.
Dimensions
Available in Northwest only
Style A Radius
SLOC NXW
41898
SLOC NXW 7/8" 3/4"
Note: NXW = Nail-On Extra Wide
B
A
3/4" Radius
USG Beadex® Brand Paper-Faced
Metal Corner Bead 3/4" Bullnose
Offset Outside Corner, Tape-On
(Baby Bull® OS)
Dimensions
Available in Northwest only
Style A Radius B
Baby Bull OS
51281
Baby Bull® OS 5/8" 3/4" 5/8"
Note: OS = Offset
3/4" Radius
USG Beadex® Brand Paper-Faced
Metal Corner Bead 1" Bullnose Offset
Outside Corner, Nail-On (SLOC NOS)
Use for applications where nailing or other mechanical fastening is required. Creates 135° offset outside
corner. Standard lengths: 8', 9', 10'. Meets ASTM C1047.
Dimensions
Available in Northwest only
Style A Radius B
SLOC NOS
41900
SLOC NOS 1-1/16" 1" 1-1/16"
Note: NOS = Nail-On Offset
1" Radius
SOFTLINE BULLNOSE
AND OFFSET
OUTSIDE CORNER
BEAD CONT.
Narrower bullnose “look” designed for 135° outside corner offsets. Standard lengths: 8', 10'.
Meets ASTM C1047.
Orovides economical alternate for bullnose corners. Can be fastened to nails or screws. Standard lengths: 8', 9',
10'. Meets ASTM C1047.
Use for smooth, rounded corners where nailing or other mechanical fastening is required. Can be fastened to
1/2" or 5/8" drywall with nails, staples or screws. Standard lengths: 8', 9', 10'. Meets ASTM C1047.