User Manual

INTERNAL MODEM INSTALLATION WITH WINDOWS 95
29
7. Once the modem is in the slot, screw the
modem firmly into place using the screw
that you removed in step 5.
8. Replace the computer’s cover and fasten it
with the screws you removed in step 4.
9. Locate the wall jack you plan to use for the
modem. If you have a phone plugged into
this jack, disconnect the phone’s cord from
the jack.
WARNING: The phone jack you
use must be for an ANALOG phone line
(the type found in most homes). Many
office buildings have digital phone
lines. Be sure you know which type of
line you have. The modem will be
damaged if you use a digital phone line.
10. Plug one end of the phone cord included with
the modem into the TELCO jack at the rear of
the modem. Plug the other end of the cable into
the wall jack.