User Manual

USING MODEM STATION
75
The Modem Configurator menu gives you
access to the following options:
Data Control
This is the “Data Control” screen.
The “Data Control” screen allows you to
assign the following basic communications
settings:
♦ PORT SPEED
♦ PARITY
♦ STOP BITS
♦ WORD LENGTH
♦ FLOW CONTROL
♦ SERIAL PORT RATE
For information on using these settings, please
refer to the “Glossary” at the back of this
manual.
Click Help for quick definitions of the
terminology used in this screen.
In the upper left-hand corner of the screen,
you will see the data control commands
currently in use.
Once you have entered the Data Control
settings, click Save to Modem. This stores
the settings so that you do not have to re-enter
them.
This screen also displays the default DIP
switch settings.