Instructions Manual

ELECTRICAL HOOKUP FROM THE HOUSE TO PUMP AND PRESSURE TANK

L1 L2 R Y B

IL1176

4. Attach the black, yellow and red wires to the

appropriate terminals marked “B”, “Y” and

“R”. (Fig. 4)

L1 L2 R Y B

IL1175

5. Connect the green ground wire from the

pump to the green ground screw in the

lower right corner of the control box.

(Fig. 5)

3. Thread the electrical wire from pump into

the right opening in the bottom of the

control box and tighten the electric wire

strain relief securely. (Fig. 3)

L1 L2 R Y B

IL1174