Installation Guide

Installation instructions
Textile care system
J14001113-R04
27/03/2015
7
Levelling
To ensure fault-free operation, the appliance must stand level with all 4 feet firmly on the ground and not
wobble.
Setting the height
Tools: Open-end wrench (SW 10) K and spirit level L
Rear adjuster feet:
Maximum height adjustment of 14 mm / 1.5 mm per turn.
Align the appliance vertically by turning the feet with the wrench
K.
Front adjuster feet:
Align the appliance vertically by turning the feet with the wrenchK.
The appliance must not wobble!
L
K