User Manual

WARNING: BE SURE TO READ, UNDERSTAND, AND APPLY INFORMATION, ENTITLED
‘SAFETY INSTRUCTIONS & WARNINGS’. DO NOT VACUUM IN AREAS WITH FLAMMABLE
GASES, VAPORS, OR EXPLOSIVE DUSTS IN THE AIR. FLAMMABLE GASES OR VAPORS
INCLUDE BUT ARE NOT LIMITED TO; LIGHTER FLUID, SOLVENT TYPE CLEANERS,
OIL-BASE PAINTS, GASOLINE, ALCOHOL OR AEROSOL SPRAYS. EXPLOSIVE DUSTS
INCLUDE BUT ARE NOT LIMITED TO; COAL, MAGNESIUM, GRAIN OR GUN POWDER. TO
REDUCE THE RISK OF HEALTH HAZARDS FROM VAPORS OR DUST, DO NOT VACUUM
TOXIC MATERIALS.
WARNING: DO NOT PLUG IN POWER CORD TO POWER OUTLET, MAKE SURE PLUG IS
DISCONNECTED BEFORE ASSEMBLING THE WET/DRY VAC
1. Verify that the power cord is disconnected from the outlet. Verify that the tank is clean and
free of dust and dirt. (fig. 1)
2. Remove all filters and dispose of properly.
3. Rinse out the inside of tank to remove any loose debris and dispose of liquid in suitable container.
4. Then carefully install the foam sleeve filter over the filter cage and place the power head back on
the tank. (fig. 2) See filter installing instructions on page 12.
DO NOT USE THE HEPA FILTER FOR LIQUID VACUUMING.
WARNING:
IF FILTERS ARE CONTAMINATED OR HAVE BEEN USED, THEY MUST BE
DISPOSED OF PROPERLY, PRIOR TO PERFORMING WET VACUUMING OPERATIONS.
OPERATING INSTRUCTIONS – WET VACUUMING
1. Fit the desired nozzle to the vacuum hose. (fig. 3)
2. Verify that the switch is in the ‘O’ OFF position before plugging the power cord into the outlet.
(fig. 4)
3. Turn the motor on by turning the switch to the ‘I’ ON position. (fig. 5)
4. After use, empty the tank by unscrewing the drain cap. Drain liquids into a suitable receptacle or
drain. Remember to refit the drain cap to the tank after draining tank. (fig. 6)
IMPORTANT! When vacuuming large quantities of liquids, do not immerse the nozzle
completely in the liquid; leave a gap at the tip of the nozzle opening to allow air inflow. The machine
14
PARTS -EXPLODED VIEW
1
15
16
17
2
3
4
5
6
7
8
9
10
11
12
13
14
18
19
20
21
22
23
24
25
26
27
VK811PH Manual Parts List
Key Number
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Drawing Number
VK01SR.A0.01
VK21SR.A0.04
W0DQ10.01.12
VK21SR.10.06
VK30SR.A0.01
TM9456.00.00
VI02SR.10.07
VI02SR.10.04
VK30SR.10.02
VJ01PF.A0.02
VK30SR.A0.03
VK30SR.10.09
VK30SR.10.04
FV9607.03.00
T0QTGX.A0.01
VK30SR.10.08
VK21SR.A0.03
VK30SR.A0.04
T0DXL1.64.UL
Description
Handle Assembly
Top Cover
Switch
Filter Sponge
Mid Cover Assembly
Motor Assembly
Foam
Seal String
Lid Assembly
Filter Basket Assembly
HEPA Cartridge Filter Assembly
flat rubber washer
HEPA filter cartridge filter retainer
Qualified Dust Bag
Cord Clamp Assembly
Cable Hook
HEPA Assembly
Cord Assembly
Inner Cable (1)
Quantity
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Key Number
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
Drawing Number
T0DXL1.65.UL
VK30PW.11.00
TVQTDK.05.00
TVQTXK.A0.03
FV8203.A0.02
VK21SR.20.02
TVQTGL.A0.07
TVQTJL.25.00
FV5804.01.00
FV5943.01.20
FV5943.01.01
FV5943.01.10
FV5944.01.00
FV5773.02.00
FV5771.01.01
FV5723.00.00
FV5311.01.01
FV9660.02.00
FV9506.01.00
Description
Inner Cable
Tank
Latch Assembly
Suction Assembly
Tube Column Assembly
Base Assembly
Wheel Assembly
Castor
Hose
Extension Wand (1)
Extension Wand (2)
Air Regulator Handle
Accessory Adaptor
Round Brush
Crevice Nozzle
Floor Squeegee
Adaptor For Power Tool
Dust Collection Bag
Foam Sleeve
Quantity
1
1
2
1
3
1
1
2
1
1
1
1
1
1
1
1
1
1
1
28
32
34
36
38
31
33
35
37
30
29