Product Manual B

BLOWER OPERATION
This Wet/Dry Vac has blowing capabilities. To use the blower feature follow the instructions listed.
1. Verify that the switch is in the '0' (OFF) position. (g. 1)
2. Make sure the container is empty before using as a blower.
3. Lift the button on the blower lter door to the unlocked position and ip the blower lter door
open. (g. 2)
4. Remove hose from the vacuum port and insert the locking end of the hose into the blowing port
on the power head and lock into position. (g. 3)
5. Fit the desired extension wand and/or nozzle to the free end of the vacuum hose. (g. 4)
6. Before turning ON the vac, rmly hold loose end of the hose. Turn the motor on by ipping the
switch to the ‘I’ ON position (g. 5) or set the switch to the remote control setting and use the
remote control.
WARNING:
ALWAYS WEAR SAFETY GOGGLES COMPLYING WITH ANSI Z87.1 (or in
Canada, CSAZ94.3) BEFORE USING BLOWER.
WARNING:
WEAR A DUST MASK IF BLOWING CREATES DUST THAT MIGHT
BE INHALED.
CAUTION:
KEEP BYSTANDERS CLEAR FROM BLOWING DEBRIS.
12