Technical data

7Installation and maintenance instructions ecoTEC exclusive 0020017768_05
4 Assembly
The Vaillant ecoTEC exclusive is delivered
pre-assembled in a package unit.
4.1 Scope of delivery
Check the delivery for completeness and lack of damage
(see Fig. 4.1 and Table 4.1).
1
2
9
3
4
8
7
6
5
10
Fig. 4.1 Scope of delivery for ecoTEC exclusive
Item Quantity Description
1 1 Boiler
2 1 Hanging bracket
33
Installation and Servicing, Users and
Flue Installation Instructions
4 1 Installation and connection accessories
5 1 Guarantee Card
6 1 Template
7 4 Copper tails for gas and water pipework
83
Flow and return service valve, gas service
valve
9 1 Pressure relief valve/double check valve
10 1 Lower cover (packed inside boiler)
Table 4.1 Scope of supply ecoTEC exclusive
4.1.1 Transporting the appliance
a
Important:
With regards to the Manual Handling
Operations, 1992 Regulations, the following lift
operation exceeds the recommended weight for
a one man lift.
General recommendations when handling
• Clear the route before attempting the lift.
• Ensure safe lifting techniques are used – keep back
straight – bend using legs.
• Keep load as close to body as possible. Do not
twist – reposition feet instead.
• If 2 persons performing lift, ensure co-ordinated
movements during lift.
• Avoid upper body/top heavy bending - do not lean
forward/sideways.
• Recommend wear suitable cut resistant gloves with
good grip to protect against sharp edges and ensure
good grip.
• Always use assistance if required.
Removal of carton from delivery van
• Recommend 2 person lift or 1 person with use of sack truck.
• If 1 person is performing lift, straddle the load, tilt and
place carton into position on truck.
• Recommend secure appliance onto truck with suitable
straps.
• Ensure safe lifting techniques are used – keep back
straight – bend using legs.
• Keep load as close to body as possible.
• If 2 persons performing lift, ensure co-ordinated
movements during lift.
• Always use assistance if required.
Carriage of carton from point of delivery to point of
installation – ground floor.
• Recommend 2 person lift or 1 person with use of sack truck.
• If 1 person is performing lift, straddle the load, tilt and
place carton into position on truck.
• Recommend secure appliance onto truck with suitable
straps.
• Ensure safe lifting techniques are used – keep back
straight – bend using legs.
• Keep load as close to body as possible.
• If 2 persons performing lift, ensure co-ordinated
movements during lift.
• Clear the route before attempting the lift.
• If removing boiler from truck straddle the load and tilt
forwards to facilitate secure grip.
• Ensure safe lifting techniques are used – keep back
straight – bend using legs.
• Do not twist – reposition feet instead.
• Take care to avoid trip hazards, slippery or wet
surfaces and when climbing steps and stairs.
• Always use assistance if required.
Assembly 4