User`s guide

User's Guide _______________________________________________________________________
24 ___________________________________________________________________ M211371EN-D
Installation Without Weather Shield
1. Remove the yellow transport protection plug when
you are ready to install the transmitter.
2. Install the transmitter to the mechanical coupling
and tighten by hand.
3. Use a wrench to tighten the connection. Turn from
the adapter, not from the transmitter body!
Use sufficient force to achieve a tight installation.
The system must be leak-free for accurate
measurement.
4. Connect the cable to port II on the transmitter.
Use a cable with a suitable connector for your
installation (straight or angled).
Let some of the cable hang from the back of the
transmitter, so that condensation cannot run along
the cable to the transmitter.