User`s guide

User's Guide _______________________________________________________________________
26 ___________________________________________________________________ M211371EN-D
4. Install the transmitter to the mechanical
coupling and tighten by hand. Try to keep
the weather shield level.
5. Use a wrench to tighten the connection.
Turn from the adapter, not from the
transmitter body!
Use sufficient force to achieve a tight
installation. The system must be leak-free
for accurate measurement.
If the weather shield is tilted after the
installation, you can straighten it by
loosening
the two nuts that keep the clamp
tight. Tighten the nuts after weather shield
is straight.
Note: The cable with the angled connector
has a fixed direction, and is designed to be
routed straight down from port II. If you
rotate the transmitter inside the weather
shield, or if you have the Alstom G1/2"
type adapter, you may have to use a cable
with a straight connector.