User`s guide

Chapter 4 ________________________________________________________________ Installation
VAISALA ________________________________________________________________________ 27
6. Connect the cable to port II on the
transmitter, and route the cable to the cable
clamp on the underside of the weather
shield. Attach the cable using a crosshead
screwdriver.
Note: Let some of the cable hang from the
back of the transmitter, so that
condensation cannot run along the cable to
the transmitter.
For cables with a straight connector:
move the rubber plug to the bottom hole
and route the cable from the back of the
weather shield.
7. Replace the weather shield cover using an
8 mm box-end wrench.