Instruction Manual

HMP230 SERIES
User's Guide M210225en-B
32
Giving the communication parameters in Windows 3.1
Giving parameters in Windows 95 and Windows NT
WINDOWS 95 WINDOWS NT
MENU WHAT TO DO MENU WHAT TO DO
Start Start
ò
move the cursor to:
ò
move the cursor to:
Programs Programs
ò
move the cursor to:
ò
move the cursor to:
Accessories Accessories
ò
move the cursor to:
ò
move the cursor to:
HyperTerminal
click
HyperTerminal
ò
move the cursor to:
ò
move the cursor to:
Hypertrm
double click
Hyperterminal
click
ò ò
Connection
Description
type the name of the
connection in the
appropriate field and
select an icon if
available; click OK.
Connection
Description
type the name of the
connection in the
appropriate field and
select an icon if
available; click OK.
ò
Phone Number
move the cursor to the
field CONNECT USING
and select 'direct to
COM x' (x = serial port
available); click OK
Connect to
move the cursor to the
field CONNECT USING and
select 'COM x' (x =
serial port available);
click OK
ò ò
COM x properties
select parameters
according to the
previous figure; click
OK
COM x properties
select parameters
according to the previous
figure, click OK
NOTE: select the
connector
according to
your computer.
Select the
connector first
and give then
other para-
meters