Instruction Manual

HMP230 SERIES

M210225en-B User's Guide

6.3.4. Analogue output commands

6.3.4.1. Selecting the output (mA/V)

Disconnect the security lock jumper!

• Select Mode in the main menu and Analog outputs in the Mode

menu:

• Select Mode ( mA / V ). The current settings for channel 1 are dis-

played:

• If the settings are correct, press ENT.

• If the settings need to be changed, press CL:

− the quantity (mA/V) starts flashing; it can be changed with the ar-

row keys and acknowledged with the ENT key

− the lower limit starts flashing

− acknowledge the lower limit with ENT or start changing it by

pressing CL; a new lower limit is given one character at a time

with the arrow keys

− the upper limit starts flashing

• acknowledge the upper limit with ENT or start changing it by pressing

CL; a new upper limit is given one character at a time with the arrow

keys

When channel 1 has been set, the program goes on to channel 2; the procedure

is the same as with channel 1.

NOTE

Also the analogue output jumpers must be set to correct

places (see Figure 23).