Instruction Manual

HMP230 SERIES

User's Guide M210225en-B

Selecting stop bits:

Full duplex/half duplex:

The processor does not allow the following combinations:

• no parity, 7 data bits, 1 stop bit: if this combination is given the

HMP230 program will change the number of stop bits to 2

• even or odd parity, 8 data bits, 2 stop bits: if this combination is given

the program changes the number of stop bits to 1

NOTE

The serial bus settings become effective only after reset.

6.3.5.3. Setting the transmitter address

Address is used when more than one transmitter is connected to one serial bus;

this way, it is possible to communicate with one transmitter at a time.

• Select Addr in the main menu; the following is displayed:

• Pressing ENT returns the program to the main menu.

• Pressing CL deletes the old address; enter the new address with the

arrow keys.