Specifications

HMT 364 Intrinsically Safe Transmitter
Model with Probe for High Pressures
BACK to
Catalog
Table of
Contents
-15-
PRICE
Humidity and Temperature Transmitter
HMT 364 A A
Transmitter type
RH+T A
$3,040
RH+T+Td+a+Tw+x D $3,540
Display on cover
no 1
yes 2 $105
Signal output
1 analog output channel (Ch1) 4... 20 m
A
1
2 analog output channels (Ch1 + Ch2) 4... 20 m
A
2 $230
LonWorks field bus (no analog outputs
)
TP78 3 $285
Analog output signals
No analog output A A
for Ch1 and Ch2
RH (0... 100%RH) B B
Temperature (choose range in next section) C C
Td (-40... 100 °C
(-40... 212 °F) HH
a (0... 500g/m3)
(0... 218.5 gr/ft3) JJ
Tw (0... 100 °C)
(+32... +212 °F) KK
NOTE:
x (0... 500 g/kg
d
(0... 3500 gr/lb) LL
- Choose A for both channels with LonWorks field bus
- Td, a, Tw and x are only available with transmitter type D
Ch1
- If only one analog output has been chosen, choose A for Ch2
Ch2
Analog output range
-20...+80°C
(-4...+176°F) D
for temperature
-20...+120°C
(-4...+248°F) E
-40...+80°C
(-40...+176°F) F
-40...+120°C
(-40...+248°F)
G
0...+100°C
(+32...+ 212°F)
H
-20...+180°C
(-4...+356°F) J
-40...+180 °C
(-40...+356°F) K
0...+180 °C
(+32...+356°F) L
Other ( specify ) X
Output units
metric 1
non-metric 2
Cable bushings
cable gland Pg11 A
conduit fitting NPT1/2" (for wire conduits) B
Ex certification and issuer
CENELEC 76/117/EEC (VTT) 1
Operating manual language
no manual A
english B
Probe cable length
2 m (6 ft) 150mm probe, max +180°C E
5 m (16 ft) 150mm probe, max +180°C F $150
10 m (33 ft) 150mm probe, max +180°C G $350
Humidity sensor type
general purpose (recommended choice) HUMICAP 180 1
special sensor for high solvent concentrations HUMICAP 180L 2
special sensor for hydrogen environments HUMICAP 180J 3
Sensor protection in probe
PPS plastic grid & stainless steel netting 16720HM 1
$30
PPS plastic grid 16526 2
$25
sintered stainless steel filter (recommended choice) 16452 3
$50
PPS plastic grid with PTFE membrane filter 17230HM 5
$25
Ex certification and issuer
CENELEC 76/117/EEC (VTT) 1
TOTAL
RH = Relative Humidity a = Absolute Humidity g/ m 3 QTY
T = Temperature x = Mixing Ratio g/ Kg TOTAL VALUE
Td = Dewpoint Temperature Tw = Wet Bulb Temperature
Selections in italic are available at extra cost.
Selections in bold text are supplied free of charge.
Example of order code with typical settings:
HMT 364A12BCD1A1BE1A3A1
Probe Transmitter unit
transmitter unit probe
BACK to
Price List
Table of
Contents
BACK to
Tech
Data
Sheet